Automation & Vision Systems
Changing web widths and web positions require a wide range of linear positioning systems. E+L positioning systems make it possible to use, in a single unit, up to four completely independent adjustment units positioned along the web. Depending on the requirements, these units can e.g. move sensors or cutters to the required position.
Operating voltage | |
Nominal value | 24 V DC |
Nominal range | 20 to 30 V DC (ripple included) |
Current consumption | 1.4 A DC (1 positioning drive) |
2.4 A DC (2 positioning drive) | |
Nominal operating width | Min. 160 mm - Max. 5840 mm |
Nominal actuating speed | 1 to 100 mm/s |
Nominal actuating force (axial) | 20 N |
Support load | Max. 50 N |
Moment M1, M2, M3 | Max. 2 Nm |
Positioning accuracy | ≤ ±0.1 mm (per slide) |
Ambient temperature | +10 °C to +50 °C |
Storage temperature | -25°C to +80 °C |
Ambient conditions | Dry |
Relative humidity | 15 to 95 % (non-condensing) |
Certifications | Declaration of incorporation according to |
Machinery Directive 2006/42/EC | |
NRTL certificate CU 72210743 01 | |
Protection rating | IP 54 |
Interface ("Standard/UDP" variant) | Ethernet protocol EL.NET, Ethernet UDP |
Interface optional ("Connect" variant) | Ethernet/IP, Profinet |
Electrical connections VSB80 | |
Operating voltage 24 V DC | Spring terminal |
Operating voltage AG 9 | M12 connector, L-coded |
Communication AG 9 | M8 connector, D-coded |
Sensor CAN | 2 x M8 connectors |
Sensor PoE | 2 x M8 connectors |
Ethernet networking | 3 x M8 connectors |
Digital inputs (configurable) | 10 x spring terminals |
Digital outputs (configurable) | 2 x spring terminals |